NHancer Pro X
GUIDE WIRE SUPPORT AND EXCHANGE TO SUPPORT EVERYDAY PCI COMPLEXITY
The NHancer Pro X is a single use device, consisting of a hub with strain relief, shaft, distal tip and torquer. The strain relief is to avoid kinking of the shaft. On the shaft depth markings are applied to indicate that the distal tip of the catheter is at the level of the distal tip of the guiding catheter (95 and 105 cm). As aid in positioning the tip of the catheter the distal tip is provided with radiopaque material to make the distal tip visible with fluoroscopy. The device provides a torquer that can be used to lock the proximal part of the catheter to the wire in such a way that the guide wire and the NHancer Pro X act as being one integral device.
CATEGORY
Vascular Intervention Coronary Microcatheters
-
Hydrophilic coating
For advanced crossability
-
Braid reinforced shaft
For improved pushablility
-
Ultra-low profile
For facilitate lesion entry and penetration
Schematic
Technical Data
| Technical specification | NX31413525 (A-NX3) |
NX31415560 (R-NX3) |
NX61413525 (A-NX6) |
NX61415560 (R-NX6) |
|---|---|---|---|---|
| Guide wire size | 0.014" | 0.014" | 0.014" | 0.014" |
| Usable length | 135 cm | 155 cm | 135 cm | 155 cm |
| Hydrophilic coating | NDurance | NDurance | NDurance | NDurance |
| Hydrophilic coating length | 25 cm | 60 cm | 25 cm | 60 cm |
| Proximal shaft outer diameter | 3.0F | 3.0F | 2.6F | 2.6F |
| Distal shaft outer diameter | 2.0F | 2.0F | 2.3F | 2.3F |
| Proximal shaft inner diameter | 0.52 mm | 0.52 mm | 0.52 mm | 0.52 mm |
| Distal shaft inner diameter | 0.45 mm | 0.45 mm | 0.48 mm | 0.48 mm |
Order Information
| IMDS article number | Required guide catheter ID | Usable length |
|---|---|---|
| NX31413525 | 5F | 135 cm |
| NX31415560 | 5F | 155 cm |
| NX61413525 | 5F | 135 cm |
| NX61415560 | 5F | 155 cm |
Downloads and Related Links
Downloads
 |
Download Brochure |
Related Links
 |
None |